Das H.C. and Parhi D.R., Modal analysis of vibrating structures impregnated with crack, International Journal of Applied Mechanics & Engineering, 13(3), 2008, 639-652.

No

No

1425-1655

Parhi D.R. and Das H.C., Diagnosis of fault and condition monitoring of dynamic structures using MANFIS technique, Journal of Aerospace Engineering Proceedings of the Institution of Mechanical Engineers, Part G, Vol. 223, 2009.

Yes

Yes

0.99

0954-4100

Mechanical Engineering Department, ITER, Bhubaneswar, Orissa, India

Das H.C. and Parhi D.R., Damage Analysis of Cracked Structure Using Fuzzy Control Technique, International Journal of Acoustics and Vibration, 13(2) , 2008 , 3-14.

Yes

No

1027-5851

Department of Mechanical Engineering, I.T.E.R., Bhubaneswar, 751010 Orissa, India

Parhi D.R. and Das H.C., Structural damage detection by fuzzy- gaussian technique, International Journal of Applied Mathematics and Mechanics, 4(2), 2008, 39-59, 

No

No

0973-0184 

Das H.C. and Parhi D.R., Identification of Crack Location and Intensity in a Cracked Beam by Fuzzy Reasoning, International Journal of Intelligent Systems Technologies and Applications 9(1), 2010, 75-95. 

No

No

1740-8865

Das H.C. and Parhi D.R., Online fuzzy logic crack detection of a cantilever beam, International Journal of Knowledge-Based and Intelligent Engineering Systems, 12(2), 2008, 157-171.

No

No

1327-2314

Parhi D.R. and Das H.C. Smart crack detection of a beam using fuzzy logic controller, International Journal of Computational Intelligence: Theory and Practice, 3(1), 2008, 9-21.

No

No

1469-0268

Das H.C. and Parhi D.R., Detection of crack in cantilever structures using fuzzy-gaussian interface technique, American Institute of Aeronautics and astronautics journal, 47(1), 2009, 105-115.

Yes

Yes

0001-1452

Department of Mechanical Engineering, I.T.E.R., Bhubaneswar, 751010 Orissa, India

Das H.C. and Parhi D.R., Fuzzy-Neuro Controller for Smart Fault Detection of A Beam, International Journal of Acoustics and Vibration, 13(2), 2009, 55-66.

Yes

No

1027-5851

Department of Mechanical Engineering, I.T.E.R, Bhubaneswar, Orissa, India, 751030

Das H.C. and Parhi D.R., Application of Neural network for fault diagnosis of cracked cantilever beam, IEEE International Symposium on Biologically Inspired Computing and Applications (BICA-2009), Bhubaneswar, India, December 21-22, 2009, 353-358.

Yes

No

1027-5851

Deptt. of Mech. Eng., I.T.E.R., Bhubaneswar, India 

Das H. C., Dash A. K., Parhi D. R., and Thatoi D. N. Experimental Validation of Numerical and Fuzzy Analysis of a Faulty Structure, System of Systems Engineering (SoSE), 2010 5th International Conference on 22-24 June 2010. 

Yes

No

Deptt. of Mechanical Engg. I.T.E.R., Bhubaneswar, India

Dayal R. Parhi and Amiya Kumar Dash, Vibration analysis of a cracked beam using finite element method, International Journal of Applied Artificial Intelligence in Engineering System, 1(2), 2009, 165-174.

No

No

0975-3176

D. R. K. Parhi and Dash Amiya Kumar, Analysis of methodologies applied for diagnosis of fault in vibrating structures, Int. J. Vehicle Noise and Vibration, Vol. 5, No. 4, 2009, 271-286.

Yes

No

0.6

1479-1471

Department of Mechanical Engineering, ITER, Khandagiri, Bhubaneswar-30, Orissa, India

D.R.K. Parhi, Amiya Kumar Dash, Faults detection by finite element analysis of a multi cracked beam using vibration signatures, Int. J. Vehicle Noise and Vibration, Vol. 6, No. 1, 2010, 40-54.

Yes

No

0.6

1479-1471

Department of Mechanical Engineering, ITER, Khandagiri, Bhubaneswar-30, Orissa, India

D.R. Parhi, Amiya Kumar Dash, Evaluation of Vibration Characteristics of a Cracked Beam using Finite Element Method, International Journal of Artificial Intelligence and Computational Research (IJAICR), 1 (1), 2009, 79-85.

No

No

0975-3974

Amiya Kumar Dash, Dayal.R.Parhi, Development of an inverse methodology for crack diagnosis using AI technique,  International Journal of Computational Materials Science and Surface Engineering (IJCMSSE).

Yes

No

1753-3465

Department of Mechanical Engineering, ITER, Khandagiri, Bhubaneswar-30, Orissa, India

Dayal.R.Parhi, Amiya K. Dash, Application of neural network and finite element for condition monitoring of structures, journal Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

Yes

Y

0022-2542

Department of Mechanical Engineering, ITER, Khandagiri, Bhubaneswar-30, Orissa, India

Amiya Kumar Dash, D.N. Thatoi, M.K. Sarangi, Analysis of the mechanical characteristics of the red mud filled hybridized composite, FAME-2010, (IEEE) on 25-27 November 2010, Chennai.

Yes

No

Department of Mechanical Engineering, ITER, Khandagiri, Bhubaneswar-30, Orissa, India

Das H. C., Dash A. K., Parhi D. R., and Thatoi D. N. Experimental Validation of Numerical and Fuzzy Analysis of a Faulty Structure, System of Systems Engineering (SoSE), 2010, U.K. 5th (IEEE) International Conference on 22-24 June 2010.

Yes

No

Deptt. of Mech. Engg, I.T.E.R., Bhubaneswar, India 

P Kumari, JK Nath, PC Dumir and S Kapuria. 2D exact solutions for flat hybrid piezoelectric and magnetoelastic angle-ply panels under harmonic load. Smart materials and Structures. 16 (5), 1651 – 1661, 2007.

Yes

Yes

1.749

0964-1726

Applied Mechanics Department, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016, India

PC Dumir, S Kapuria, P Kumari and JK Nath. Two-dimensional benchmark solution for buckling and vibration of simply supported hybrid piezoelectric angle-ply flat panels. ZAMM – Zeitschrift fur Angewandte Mathematik und Mechanik. 88 (1),  42 – 57, 2008.

Yes

Yes

0.87

0044-2267

Department of Applied Mechanics, IIT Delhi, Hauz Khas, New Delhi 110016, India

PC Dumir, JK Nath, P Kumari and S Kapuria. Improved efficient zigzag and third order theories for circular cylindrical shells under thermal loading. Journal of Thermal Stresses. 31 (4), 343 – 367, 2008.

Yes

Yes

1.061

0149-5739

Department of Applied Mechanics, IIT Delhi, New Delhi, India

P Kumari, JK Nath, S Kapuria and PC Dumir. An improved third order theory and assessment of efficient zigzag theory for angle-ply flat hybrid panels. Composite Structures. 83 (2), 226 – 236, 2008.

Yes

Yes

2.006

0263-8223

Department of Applied Mechanics, IIT Delhi, Hauz Khas, New Delhi, 110016, India

P Kumari, JK Nath, S Kapuria and PC Dumir. Efficient global zigzag theory for elastic laminated plates. Journal of reinforced plastics and composites. 28 , 1025 – 1047, 2009.  

Yes

Yes

0.763

0731-6844

Department of Applied Mechanics, IIT Delhi, New Delhi 110016, India

S Kapuria, P Kumari and JK Nath. Analytical piezoelasticity solution for vibration of piezoelectric laminated angle-ply circular cylindrical panels. Journal of Sound and Vibration. 324 (3-5), 832-849, 2009.

Yes

Yes

1.414

0022-460X

Department of Applied Mechanics, Indian Institute of Technology Delhi, New Delhi, 110016, India

JK Nath and S Kapuria. Improved smeared and zigzag third order theories for piezoelectric angle-ply laminated cylindrical shells under electrothermomechanical load. Journal of Mechanics of Materials and Structures.  4 (6), 1157-1184, 2009.

Yes

Yes

1559-3959

Department of Applied Mechanics, Indian Institute of Technology Delhi, New Delhi 110016, India

S. Kapuria and JK Nath. Efficient laminate theory for predicting transverse shear stresses in piezoelectric composite plates. AIAA Journal. 47 (12), 3022-3030, 2009. 

Yes

Yes

0.592

0001-1452

Indian Institute of Technology-Delhi, New Delhi 110016, Department of Applied Mechanics

S. Kapuria, P. Kumari and J. K. Nath. Efficient modeling of smart piezoelectric composite laminates: a review. Acta Mechanica, DOI 10.1007/s00707-010-0310-0, published online 22 April 2010.

Yes

Yes

1.137

0001-5970

Department of Applied Mechanics, IIT Delhi, Hauz Khas, New Delhi, India

Prediction of Entrance Length and  Suction Rate for a Cylindrical Sucking Funnel, D.P.Mishra & S.K.Dash, International journal for numerical methods in fluids, Vol. 63(6), 2010, pp. 681-700.

Yes

Yes

0.936

0271-2091

Department of Mechanical Engineering, IIT, Kharagpur 721 302, India

Numerical Investigation of Air Suction Through the Louvers of a Funnel due to High Velocity Air Jet, D.P.Mishra & S.K.Dash, Computers & Fluids, Vol. 39(9), 2010, pp. 1597-1608.

Yes

Yes

1.27

0045-7930

Institute of Technical Education and Research, S'O'A University, Bhubaneswar 721 030, India

Isothermal Jet Suction through the Lateral openings of a Cylindrical Funnel, D.P.Mishra & S.K.Dash, Journal of ship research, Vol. 54(4), 2010, pp. 1-13.

Yes

Yes

0022-4502

Department of Mechanical Engineering, Indian Institute of Technology, Kharagpur, India

Study of effect of Louvers opening area and Multiple Nozzles on Suction   Rate due to high velocity Air Jet, D.P.Mishra & S.K.Dash, International Conference on Recent Trends in Mechanical Engineering, 2007.                    

No

No

Theoretical Estimation of Suction Rate due to High Velocity Jet, D.P.Mishra & S.K.Dash, International Conference on Theoretical, Applied, Computational and Experimental Mechanics, 2007. 

No

No

Numerical Investigation of Air Suction into a Louvered Funnel, D.P.Mishra & S.K.Dash, International conference on ship & offshore Technology, 2009. 

No

No

Numerical investigation of mixing capability of different configuration tundishes. National conference on frontiers in chemical engineering, December 12 – 14 2007, IIT Guwahati.

No

No

Use of rice bran oil as a fuel for small horse power diesel engine, S.K.Acharya, R.K. Swain, M.K. Mohanty, Accepted by Energy sources Part. A, Taylor and francis. (Accepted on 13.04.2009).

Yes

Yes

1.094

1556-7036

Department of Mechanical Engineering, ITER, Buhubaneswar, Orissa, India

Optimization of injection pressure of a direct Injection diesel engine using Karanja oil as Diesel Fuel,S.K.Acharya,R.K.Swain,S.N.Das,Energy Sources Part-A , Taylor and Francis(Accepted on 12 Sept.2009).

Yes

Yes

1.094

1556-7037

Kusum oil as a fuel for small horse power diesel engine, S.K. Acharya, R.K. Swain, M.K. Mohanty, International journal of Engg. Technology (IACSIT ),2009, Vol.1, Page no.219-223.

No

No

0975-4024

Performance investigations of  Karanja oil(methyl ester) as a fuel in diesel engine with Exhaust gas  recirculation, S.K. Acharya, R.K. Swain, M.K.Mohanty , International Journal of Mechanical and Automobile Engg,2009,Vol.3.Page no.83-97.

No

No

Performance and emissions characteristics of Karanja oil in a direct injection diesel engine using a shell and tube heat exchanger as SVO kit, S.K. Acharya, R.K. Swain, M.K.Mohanty , International Journal of Sustainable Energy, taylor and Francis, under consideration for publication.

No

No

1478-6451

Environmental aspects of running a direct Injection diesel engine using preheated straight vegetable oil, S.K.Acharya, Technoinsight National Journal(2010), Rajiv Gandhi Forum(Orissa),Vol.2,No.1,49-56.

No

No

The effect of Kusum oil on combustion of diesel engine using heat exchanger (Submissioncode:IJETP16245), S.K.Acharya, R.K.Swain ,M.K.Mohanty, under review in the International Journal of Energy Technology and Policy, (IJETP), Inderscience Publisher.

No

No

1472-8923

Mamata Kumari Padhy, R.P. Saini (2008) “A Review on Silt erosion in Hydro turbines” published in Renewable and Sustainable Energy Reviews, Elsevier, 12 (2008) 1974–1987 

Yes

Yes

5.348

1364-0321

Alternate Hydro Energy Centre, Indian Institute of Technology Roorkee, Roorkee, India

Mamata Kumari Padhy, R.P. Saini (2009) “Effect of Size and Concentration of Silt Particles on Erosion of Pelton Turbine Buckets” Energy 34(2009)  1477–1483, Energy, Elsevier.

Yes

Yes

2.952

0360-5442

Alternate Hydro Energy Centre, Indian Institute of Technology Roorkee, Roorkee, India

Mamata Kumari Padhy, B. Pradhan,  S. K Roychowdhury, (2006) ) “Finite Element Analysis of Contact and Interfacial Stresses in Artificial Hip Joint”  Journal of Biomechanics 2006, Vol. 39 (Suppl 1)

Yes

Yes

2.657

0021-9290

Orissa Engineering College, bhubaneswar

Mamata Kumari Padhy, R.P. Saini “Study of Silt Errosion on performance of a Pelton Turbine”. Energy, Volume 36, Issue 1, January 2011, Pages 141-147 

Yes

Yes

2.952

0360-5442

ITER, S ‘O’ A University, Bhubaneswar, India

Mamata Kumari Padhy & B.Pradhan (2004) “Finite Element Analysis of Contact and Interfacial Stresses in Artificial Hip Joint” published in 49th Congress of The Indian Society of Theoretical and Applied Mechanics (An International Meet) at NIT, Rourkela.

No

No

Mamata Kumari Padhy & R.P.Saini (2006) “Silt Erosion in Hydro Turbines – A Review” published in IInd  National Conference on Recent Development in Mechanical Engineering at Thapar Institute of Engineering and Technology, Patiala.

No

No

M.K. Padhy, R.P. Saini (2008) “Effect of Buckets Erosion due to Silt Laden Flow on Pelton Turbine Efficiency” REA-2008, IITD, New Delhi,11-13 Dec. 2008. 

No

No

M.K. Padhy, R.P. Saini (2009) “Effect of Lower Concentration on Erosive Wear of Pelton Turbine Bucket” 33rd IAHR Congress, Vancouver, B.C. Canada 9-14 Aug. 2009

No

No

M. K. Padhy, R. P. Saini, S. K. Singal, R. Singh “ A Review on Cavitation Erosion in Hydro Turbine” Hydropower’10  –  6th International Hydropower  Conference,  1‐3  February  2010,  Tromsø,  NORWAY  

No

No

Amiya Kumar Dash, D.N. Thatoi, M.K. Sarangi, Analysis of the mechanical characteristics of the red mud filled hybridized composite, FAME-2010, (IEEE) on 25-27 November 2010, Chennai.

Yes

No

Department of Mechanical Engineering, ITER, Khandagiri, Bhubaneswar-30, Orissa, India

Das H. C., Dash A. K., Parhi D. R., and Thatoi D. N. Experimental Validation of Numerical and Fuzzy Analysis of a Faulty Structure, System of Systems Engineering (SoSE), 2010 5th International Conference on 22-24 June 2010. 

Yes

No

Deptt. of Mech. Engg, I.T.E.R., Bhubaneswar, India 

Choudhury, B.B., Biswal, B.B. Mahapatra, R.N., Attribute-based relative ranking of robot for task assignmentProceedings - 2009 International Conference on Computer Engineering and Technology, ICCET 2009 Volume 1, 2009, Article number 4769421, Pages 32-36.

Yes

No

Department of Mechanical Engineering, SIT Bhubaneswar, Orissa, India

Choudhury, B.B., Biswal, B.B. Mahapatra, R.N., Attribute-based ranking and selection of robots for task assignment, Proceedings - International Conference on Advanced Computer Control, ICACC 2009, Article number 4777385, Pages 459-463.

Yes

No

Dept. of Mech. Engg., SIT Bhubaneswar, Orissa, India

Choudhury, B.B., Biswal, B.B., Mishrai, D, Mahapatra, R.N., Appropriate evolutionary algorithm for scheduling in FMS. 2009 World Congress on Nature and Biologically Inspired Computing, NABIC 2009; Coimbatore; 9 December 2009 through 11 December 2009.

Yes

No

Dept. of Mech. Eng., IGIT, Sarang, India 

Sharma, S., Mohapatra, R.N., Biswal, B.B., Choudhury, B.B., Generation of robotic assembly sequence using ant colony optimization., ICIIS 2009 - 4th International Conference on Industrial and Information Systems 2009, Conference Proceedings  2009, Article number 5429805, Pages 520-525.

Yes

No

Department of Mechanical Engg., ITER, Bhubaneswar, Orissa, India

Mahapatra, R.N., Biswal, B.B. Modeling for the Optimization of Closed-loop Supply Chain with Remanufacturing., International conference on uncertainty management in green field projects.,ICUM-2011.,22nd-23rd January,2011.communicated to Int. J. of Project Organisation and Management

No

No

Sarangi H, Murthy KSRK, Chakraborty D. Optimum Strain Gage Location for Evaluating Stress Intensity Factors in Single and Double Ended Cracked Configurations. Engineering Fracture Mechanics, 2010; Vol. 77,3190- 3203.

Yes

Yes

0013-7944

Department of Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati 781 039, India

Sarangi H, Murthy KSRK, Chakraborty D. Radial locations of strain gages for accurate measurement of mode I stress intensity factor. Material and Design, 2010; Vol. 31, 2840-2850.

Yes

Yes

0261-3069

Department of Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati, 781 039, India

Sarangi H, Murthy KSRK, Chakraborty D. Extent of three parameter zone and optimum strain gage location on different eccentric cracked Configurations. International Conference on IEEE, (Accepted for publication and presentation.)Mechanical and Aerospace Engineering (CMAE 2011), E10033, New Delhi, Indexed by IEEE, Accepted for publication and presentation.

Yes

No

Department of Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati 781 039, India

Sarangi H, Murthy KSRK, Chakraborty D. Upper bound for radial location of a strain gage for determination of SIF in double edge cracked configurations. Fifth International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM- 2010), ID-229 IIT Kharagpur (Presented).

Yes

No

Department of Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati 781 039, India

Sarangi H, Murthy KSRK, Chakraborty D. Location of strain gage on eccentric cracked plates for accurate determination of stress intensity factor. Proc. of the 4th International Conference on Advances in Mechanical Engineering (ICAME-2010), DD-12, NIT Surat, Gujarat.

Yes

No

Department of Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati 781 039, India

Sarangi H, Murthy KSRK, Venktash G, Chakraborty D. Strain gage locations for accurate measurement of the opening mode stress intensity factors ; Proc. of the International Conference on Emerging Research and Advances in Mechanical Engineering (ERA 2009) , DE 12, Chennai.

Yes

No

Department of Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati 781 039, India

S.K. Sarangi and M.C. Ray, 2010, “Smart Damping of Geometrically Nonlinear Vibrations of Laminated Composite Beams Using Vertically Reinforced 1-3 Piezoelectric Composites”, Smart Materials and Structures, Vol. 19, 075020.

Yes

Yes

0964-1726

Department of Mechanical Engineering, Indian Institute of Technology, Kharagpur-721302, India

S.K. Sarangi and M.C. Ray, 2010, “Active Damping of Geometrically Nonlinear Vibrations of Laminated Composite Shallow Shells Using Vertically/obliquely Reinforced 1-3 Piezoelectric Composites”. International Journal of Mechanics and Materials in Design (Springer), (Accepted for publication).

Yes

No

1569-1713

Department of Mechanical Engineering, Indian Institute of Technology, Kharagpur, 721302, India

S.K. Sarangi and M.C. Ray, “Geometrically Nonlinear Finite Element Analysis of Laminated Smart Composite Plates”, Int. Conf. on Vibration Engg. and Tech. of Machinery (VETOMEC-VI) at IIT, Delhi during December 13-15, 2010.

Yes

No

S.K. Sarangi and M.C. Ray, 2010, “Smart Damping of Geometrically Nonlinear Transient Vibrations of Laminated Composite Panels”, Int. Conf. on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM-2010) at IIT, Kharagpur during December 27-29, 2010.

Yes

No